<?xml version="1.0" encoding="UTF-8" ?>
<rss version="2.0">
<channel>
  <title>EdgeIntelLab</title>
  <link>https://EdgeIntelLab.com</link>
  <description>Embedded systems, edge AI, robotics, electronics, Linux, IoT, and software engineering.</description>
  <item>
  <title><![CDATA[ESP32 Beginner Course #10: Web Server LED Control from a Browser]]></title>
  <description><![CDATA[Build a simple ESP32 web server, serve an HTML control page, and turn an LED on and off from a browser over WiFi.]]></description>
  <link>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-10-web-server-led-control</link>
  <guid>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-10-web-server-led-control</guid>
  <pubDate>Sun, 12 Jul 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[ESP32 Beginner Course #9: WiFi Basics and Network Connection]]></title>
  <description><![CDATA[Connect the ESP32 to a WiFi network, understand SSID and password settings, print connection status, use reconnect logic, and find the board IP address.]]></description>
  <link>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-09-wifi-basics</link>
  <guid>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-09-wifi-basics</guid>
  <pubDate>Sat, 11 Jul 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[ESP32 Beginner Course #8: Temperature and Humidity Sensor with DHT11 or DHT22]]></title>
  <description><![CDATA[Connect a DHT11 or DHT22 sensor to the ESP32, install the Arduino library, read temperature and humidity, and handle failed readings.]]></description>
  <link>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-08-temperature-humidity-dht</link>
  <guid>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-08-temperature-humidity-dht</guid>
  <pubDate>Fri, 10 Jul 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[ESP32 Beginner Course #7: LDR Light Sensor and Automatic Night Light]]></title>
  <description><![CDATA[Read an LDR photoresistor with the ESP32 ADC, understand voltage dividers, calibrate a threshold, and build an automatic night light.]]></description>
  <link>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-07-ldr-light-sensor</link>
  <guid>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-07-ldr-light-sensor</guid>
  <pubDate>Thu, 09 Jul 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[ESP32 Beginner Course #6: Serial Monitor and Debugging Basics]]></title>
  <description><![CDATA[Learn how to debug ESP32 projects using Serial Monitor, print variable values, inspect button and sensor readings, and solve common baud rate and wiring problems.]]></description>
  <link>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-06-serial-monitor-debugging</link>
  <guid>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-06-serial-monitor-debugging</guid>
  <pubDate>Wed, 08 Jul 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[ESP32 Beginner Course #5: Analog Input with a Potentiometer and ADC]]></title>
  <description><![CDATA[Learn how ESP32 analog input works by reading a potentiometer with the ADC, converting raw values to voltage, and using the knob to control LED brightness.]]></description>
  <link>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-05-analog-input-potentiometer-adc</link>
  <guid>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-05-analog-input-potentiometer-adc</guid>
  <pubDate>Tue, 07 Jul 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[ESP32 Beginner Course #4: PWM Explained by Controlling LED Brightness]]></title>
  <description><![CDATA[Learn PWM on the ESP32 using LEDC, duty cycle, frequency, 8-bit resolution, and a fading LED brightness example.]]></description>
  <link>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-04-pwm-led-brightness</link>
  <guid>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-04-pwm-led-brightness</guid>
  <pubDate>Mon, 06 Jul 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[ESP32 Beginner Course #3: Push Button Input and INPUT_PULLUP Explained]]></title>
  <description><![CDATA[Read a push button with ESP32 GPIO4, understand floating inputs, pull-up and pull-down resistors, and control an LED using digitalRead.]]></description>
  <link>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-03-input-pullup-button</link>
  <guid>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-03-input-pullup-button</guid>
  <pubDate>Sun, 05 Jul 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[ESP32 Beginner Course #2: GPIO Explained by Controlling an LED]]></title>
  <description><![CDATA[Learn how ESP32 GPIO output works by wiring an external LED, using HIGH and LOW signals, adding a current-limiting resistor, and writing digital output code.]]></description>
  <link>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-02-gpio-led</link>
  <guid>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-02-gpio-led</guid>
  <pubDate>Sat, 04 Jul 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[ESP32 Beginner Course #1: Set Up Arduino IDE and Upload Your First Program]]></title>
  <description><![CDATA[Set up Arduino IDE for ESP32 development, install Espressif board support, select the correct board and port, upload Blink, and troubleshoot the first upload.]]></description>
  <link>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-01-setup-arduino-ide</link>
  <guid>https://EdgeIntelLab.com/articles/embedded-systems/esp32-beginner-course-01-setup-arduino-ide</guid>
  <pubDate>Fri, 03 Jul 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[Build a Custom PetaLinux 2024.2 OS for the Kria KR260]]></title>
  <description><![CDATA[A practical guide to preparing a Linux host, creating a KR260 project from the matching BSP, customizing PetaLinux, building the SDK and boot image, and starting the target board.]]></description>
  <link>https://EdgeIntelLab.com/articles/embedded-systems/kria-kr260-petalinux-custom-os</link>
  <guid>https://EdgeIntelLab.com/articles/embedded-systems/kria-kr260-petalinux-custom-os</guid>
  <pubDate>Mon, 03 Feb 2025 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[Designing an IoT Dashboard That Engineers Can Trust]]></title>
  <description><![CDATA[How to build IoT dashboards around device state, alarms, trends, audit trails, and operational clarity.]]></description>
  <link>https://EdgeIntelLab.com/articles/software-development/iot-dashboard-architecture</link>
  <guid>https://EdgeIntelLab.com/articles/software-development/iot-dashboard-architecture</guid>
  <pubDate>Thu, 02 Apr 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[A Practical Embedded Linux Development Workflow]]></title>
  <description><![CDATA[Versioning, deployment, logging, and remote debugging practices for embedded Linux systems that need repeatable development.]]></description>
  <link>https://EdgeIntelLab.com/articles/linux/embedded-linux-dev-workflow</link>
  <guid>https://EdgeIntelLab.com/articles/linux/embedded-linux-dev-workflow</guid>
  <pubDate>Sat, 21 Mar 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[CAN Bus Diagnostics for Embedded and Automotive Systems]]></title>
  <description><![CDATA[A compact guide to approaching CAN bus faults, logging, message timing, and integration checks in real engineering systems.]]></description>
  <link>https://EdgeIntelLab.com/articles/electronics/can-bus-diagnostics</link>
  <guid>https://EdgeIntelLab.com/articles/electronics/can-bus-diagnostics</guid>
  <pubDate>Sat, 07 Mar 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[Building an Edge AI Perception Pipeline That Can Be Audited]]></title>
  <description><![CDATA[A practical view of collecting, aligning, validating, and versioning perception data for edge AI systems.]]></description>
  <link>https://EdgeIntelLab.com/articles/ai/edge-ai-perception-pipeline</link>
  <guid>https://EdgeIntelLab.com/articles/ai/edge-ai-perception-pipeline</guid>
  <pubDate>Sun, 22 Feb 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[Designing a ROS 2 to micro-ROS Control Path]]></title>
  <description><![CDATA[How to think about command transport, timing, safety, and debugging when a ROS 2 computer controls a microcontroller-based motor board.]]></description>
  <link>https://EdgeIntelLab.com/articles/robotics/ros2-microros-control</link>
  <guid>https://EdgeIntelLab.com/articles/robotics/ros2-microros-control</guid>
  <pubDate>Tue, 03 Feb 2026 00:00:00 GMT</pubDate>
</item><item>
  <title><![CDATA[A Maintainable STM32 Firmware Architecture for Field Devices]]></title>
  <description><![CDATA[A practical firmware structure for STM32 systems that need reliable drivers, diagnostics, communication layers, and long-term maintainability.]]></description>
  <link>https://EdgeIntelLab.com/articles/embedded-systems/stm32-firmware-architecture</link>
  <guid>https://EdgeIntelLab.com/articles/embedded-systems/stm32-firmware-architecture</guid>
  <pubDate>Mon, 12 Jan 2026 00:00:00 GMT</pubDate>
</item>
</channel>
</rss>